If you have sunken or uneven concrete on your Long Beach property, you’ve probably come across two main repair methods: polyurethane concrete leveling and mudjacking. Both can lift sunken concrete, but they work very differently — and the choice between them can mean the difference between a repair that lasts decades and one that fails within a few years.
In this guide, we’ll break down exactly how each method works, compare them head-to-head, and explain why most Long Beach homeowners are choosing polyurethane foam leveling over traditional mudjacking.
What Is Mudjacking?
Mudjacking (also called slabjacking or concrete raising) has been around since the 1930s. It works by pumping a thick slurry — typically a mixture of sand, cement, and soil — beneath a sunken concrete slab to lift it back into position.
The Mudjacking Process:
- Large holes (2-3 inches in diameter) are drilled into the concrete slab
- A cement-based slurry is pumped through the holes under pressure
- The slurry fills voids and lifts the slab upward
- The holes are patched with concrete
- The area must cure for 24-48 hours before it can be used
What Is Polyurethane Concrete Leveling?
Polyurethane concrete leveling (also called foam jacking or polyjacking) is a more modern approach that uses high-density expanding polyurethane foam instead of cement slurry. It was originally developed for infrastructure projects by the Department of Transportation and has since become the preferred method for residential and commercial concrete repair.
The Polyurethane Leveling Process:
- Tiny holes (5/8 inch — about the size of a dime) are drilled into the slab
- Two-part polyurethane foam is injected beneath the concrete
- The foam expands, filling voids and lifting the slab with precision
- The small holes are patched with a color-matched compound
- The concrete is ready for use immediately — no curing time
Head-to-Head Comparison
1. Hole Size and Appearance
Mudjacking: Requires holes 2-3 inches in diameter. These leave visible patch marks that are difficult to hide, especially on decorative or stamped concrete.
Polyurethane Leveling: Uses holes just 5/8 inch wide — roughly the size of a dime. The patches are nearly invisible and blend seamlessly with the surrounding concrete.
2. Weight
Mudjacking: The cement slurry is extremely heavy, adding 100-150 lbs per cubic foot to the soil beneath your slab. If the soil was already compressing under the weight of the concrete, adding more weight can cause it to sink again.
Polyurethane Leveling: The foam weighs just 2-4 lbs per cubic foot — about 1/50th the weight of mudjacking slurry. It actually stabilizes the soil rather than burdening it.
3. Precision
Mudjacking: Difficult to control precisely. The slurry flows unpredictably, and over-lifting is a common problem.
Polyurethane Leveling: The foam expands in a controlled, predictable manner. Technicians can raise concrete to within 1/10th of an inch of the desired height.
4. Cure Time
Mudjacking: 24-48 hours before the area can be used. The slurry needs time to harden and set.
Polyurethane Leveling: Ready for use immediately. The foam reaches 90% of its final strength within 15 minutes.
5. Durability
Mudjacking: Susceptible to erosion, especially in Long Beach where soil moisture levels fluctuate. The slurry can wash out over time, causing the concrete to sink again.
Polyurethane Leveling: The foam is waterproof, doesn’t erode, and maintains its shape and density indefinitely. It’s resistant to the soil conditions common in Long Beach, including clay soils and moisture fluctuations.
6. Cost
Mudjacking: Slightly less expensive upfront — typically 10-20% cheaper than polyurethane leveling.
Polyurethane Leveling: Slightly higher upfront cost, but significantly better long-term value because the repair is more durable and less likely to need re-doing.
Why Long Beach Homeowners Should Choose Polyurethane
Long Beach has specific soil and environmental conditions that make polyurethane leveling the clear winner:
- Clay soils: Much of Long Beach sits on expansive clay soils that shrink and swell with moisture changes. The lightweight foam won’t add burden to these already-active soils.
- Proximity to water: Being a coastal city, Long Beach properties are more susceptible to groundwater and moisture issues. Polyurethane foam is waterproof; mudjacking slurry is not.
- Older neighborhoods: Many Long Beach homes were built in the 1940s-1960s with concrete that’s now 60+ years old. Precise, non-invasive leveling preserves these older slabs better.
Need Concrete Leveling in Long Beach?
Get a free estimate from Long Beach’s most trusted concrete leveling company.
The Bottom Line
While mudjacking still has its place in certain commercial applications, polyurethane concrete leveling is the superior choice for virtually all Long Beach residential projects. It’s lighter, more precise, faster, more durable, and better suited to our local soil conditions. The slightly higher upfront cost is more than offset by the longer lifespan and better performance of the repair.
If you’re dealing with sunken concrete on your Long Beach property, don’t settle for outdated methods. Contact us today for a free estimate and see why polyurethane foam leveling is the smart choice for your home.
Need Concrete Leveling in Long Beach?
Get a free, no-obligation estimate from our Long Beach concrete leveling experts.
Get Free Estimate